THE ONLY PACK YOU NEED
The new GPaint Ultimate Starter Pack contains all the 8 colors you need, including 6 standard colors and 2 metallic colors. Paint and create your model kits like a professional, without primer, experience, or the hassle of getting the “paint to thinner” ratio right.
Primers are hard to come by, not to mention that they are expensive as well. GPaint’s primerless feature allows you to skip priming your model kits when you don’t need to without worrying about paint chipping/peeling off when masking or posing.
We have created a unique formula to make our paint tough and durable. So you don’t have to worry about paint chipping or accidental scratches.
Airbrushing has never been this easy. Just pour and start painting. The new GPaint is pre-thinned and ready to use straight out of the bottle. No more hassle of getting the “paint to thinner” ratio right.
Every bottle of GPaint contains 65ML of paint because we understand the frustration of running out or not having enough paint in the middle of your painting session. Each bottle should be enough to last at least 3-4 builds.
GPaint dries faster than your usual paint so that you can have a seamless transition from painting to masking. GPaint cures in just under 10 – 15 minutes, depending on the surrounding temperature and humidity.
GPaint is ready to mix anytime, anywhere. Just pour 2 or more colors together to create your unique colors. Save money, saves time, and save space.
HOW TO STORE:
Store tightly capped and away from direct sunlight. Use in a well-ventilated room and away from open flames.
DIRECTION OF USE:
Start by shaking the bottle well. Make sure that it is well mixed, and unscrew the bottle cap to remove the paint seal. Screw on the bottle cap securely and unscrew the transparent part of the cap. Start pouring the paint in your paint container or straight into the airbrush color cup to painting or airbrushing.
1. GPaint is formulated for universal use, hence please experiment with different PSI when airbrushing to find the optimum flow for your airbrush. Recommended to try with 15psi and slowly work your way up to 40psi.
2. GPaint will work fine with airbrush size ranging from 0.2mm up till 0.5mm with varying PSI.
3. The primerless feature allows you to skip priming entirely to save time and money. However, if you’re painting red, yellow or warm colors over dark parts of your kit, please paint a coat of white as a base for the colors to truly shine. Other than that, you’re good!